Powermatic
SKU:PM9-1791500
Powermatic PM1500 15 in. Woodworking Bandsaw, 3 HP
Powermatic PM1500 15 in. Woodworking Bandsaw, 3 HP
14 in. resaw height · 14-1/2 in. throat · 3 HP
The PM1500 combines a 14-inch resaw height and 14-1/2-inch throat with a 3 HP, 230 V single-phase motor. Cast-iron wheels, bearing blade guides and a tall resaw fence support curved cuts and resawing. A 3/8-inch, 6 TPI hook blade is included.
- Resaw capacity
- 14.0 in
- Motor
- 3.0 HP
- Power supply
- 230 V · Single phase
Couldn't load pickup availability
Machine net weight: 394.0 lb
Confirm freight access, unloading arrangements, and shop clearance before delivery.
Features
Practical details that help with setup, cutting, and everyday use.
Fourteen-inch resaw height
The saw accommodates stock up to 14 inches tall with a 14-1/2-inch throat.
Cast-iron wheels
Heavy wheels and polyurethane tires support smooth blade travel.
Bearing guides
Ball-bearing blade guides support the blade above and below the table.
Fence and resaw pin
The tall fence and supplied resaw pin guide straight and resaw cuts.
Tilting table
The cast-iron table tilts ten degrees left and 45 degrees right.
Tension release
A quick-release tension mechanism simplifies blade changes.
Know the details
Specifications
Review the product’s dimensions, capacities and compatibility before ordering.
| Blade Size | 3/8 x 0.065 in. x 6 TPI hook (provided) |
|---|---|
| Coating | None |
| Cutting Capacity - Height | 14 in. |
| Cutting Capacity - Width | 14.5 in. |
| Dust Port Outside Diameter | Two 4 in. ports |
| Model Number | PM1500 |
| Net weight | 394 lb |
| Manufacturer part number | 1791500 |
| Factory wiring | 230 V |
| Shipping weight | 502 lb |
| Style Type | Floor Standing |
| Table height | 40 in. |
| Wheel Diameter | 15 in. |
| Input power | 230 V 1 Ph |
| Motor power | 3 HP |
| Motor phase / drive | Single |
| Motor Voltage | 230 V |
| Blade length | 153 in. nominal, +/- 1/2 in. |
| Blade width range | 1/8–1 in. |
| Included blade | 3/8 in. wide, 6 TPI hook type |
| Blade speed | 3,100 SFPM |
| Table size | 21-1/2 x 16 in. |
| Table tilt | 10 degrees left, 45 degrees right |
| Fence plate size | 19-3/4 x 6-1/2 in. |
| Required dust airflow | 600 CFM |
| Stand footprint | 17-3/4 x 25-1/4 in. |
| Overall dimensions (L x W x H) | 30-1/4 x 34-3/8 x 80-1/4 in. |
| Power cord | 6.6 ft., plug included |
| Recommended circuit | 20 A |
Manufacturer warranty
5 Year Limited Warranty
Manuals & support
Use the manufacturer’s documentation for assembly, adjustments, maintenance, and safe operation.
Delivery planning
A little planning makes room for your machine and the work ahead.
Check the delivery route
Measure doors, turns, and the route to the machine’s final location. Confirm the packed dimensions and delivery access before ordering.
Plan unloading and positioning
Confirm the delivery service, unloading equipment, and any liftgate needs before ordering. Machine net weight is not the packed shipping weight.
Prepare power and working space
Follow the manufacturer’s manual for electrical requirements, dust collection, clearances, and setup. Allow space for the workpiece, infeed, and outfeed.