JET
SKU:JT9-708404
JET JBOS-5 Benchtop Oscillating Spindle Sander, 1/2 HP, 115V
JET JBOS-5 Benchtop Oscillating Spindle Sander, 1/2 HP, 115V
Five spindle sizes · 1 in. oscillation · Tilting table
Sand curves and shaped wood edges with the JBOS-5. Five spindle sizes and 100-grit sleeves are supplied, with a 1-inch oscillating stroke and a cast-iron table that tilts for bevel work.
- Motor
- 0.5 HP
- Power supply
- 115 V · Single phase
Couldn't load pickup availability
Machine net weight: 75.6 lb
Confirm freight access, unloading arrangements, and shop clearance before delivery.
Features
Practical details that help with setup, cutting, and everyday use.
Contour sanding
Five included spindle diameters support inside curves and edge work.
Oscillating action
One-inch stroke at thirty oscillations per minute distributes abrasive contact.
Bevel work
Cast-iron table tilts up to 45 degrees down.
Onboard storage
Spindles and table inserts store on the machine.
Dust connection
2-inch port connects to a suitable minimum 300 CFM extraction system.
Know the details
Specifications
Review the product’s dimensions, capacities and compatibility before ordering.
| Manufacturer part number | 708404 |
|---|---|
| Model | JBOS-5 |
| Motor power | 0.5 HP |
| Supply voltage | 115 V |
| Phase | Single phase |
| Factory prewired voltage | 115 V |
| Electrical details | 115V single-phase supply |
| Frequency | 60 Hz |
| Sanding spindle diameters included | 1/4, 1/2, 5/8, 1-1/2 and 2 in. |
| Sleeve sizes included | 1/4 x 6, 1/2 x 6, 5/8 x 6, 1-1/2 x 5-1/2 and 2 x 5-1/2 in. |
| Included abrasive | 100-grit sleeve on each of five supplied spindles |
| Spindle speed | 1,725 RPM |
| Oscillation rate | 30 per minute |
| Oscillation stroke | 1 in. |
| Table size | 14-1/2 x 14-1/2 in. |
| Table tilt | 0 to 45 degrees down |
| Base footprint | 11-3/4 x 11-3/4 in. |
| Height without spindle | 18-3/4 in. |
| Dust port | 2 in. outside diameter |
| Minimum dust extraction | 300 CFM |
| Power cord | 5-1/2 ft. |
| Switch | Manual, with removable safety key |
| Included inserts | Two round and two oblong table inserts |
| Storage | Onboard spindle and insert storage |
| Optional 3 in. spindle | Sold separately; matching 3 in. table insert required |
| Net weight | 75.6 lb |
| Shipping weight | 82 lb |
Manufacturer warranty
5 Year Limited Warranty
Manuals & support
Use the manufacturer’s documentation for assembly, adjustments, maintenance, and safe operation.
Delivery planning
A little planning makes room for your machine and the work ahead.
Check the delivery route
Measure doors, turns, and the route to the machine’s final location. Confirm the packed dimensions and delivery access before ordering.
Plan unloading and positioning
Confirm the delivery service, unloading equipment, and any liftgate needs before ordering. Machine net weight is not the packed shipping weight.
Prepare power and working space
Follow the manufacturer’s manual for electrical requirements, dust collection, clearances, and setup. Allow space for the workpiece, infeed, and outfeed.