• Baileigh RDB250 IMG MAIN
  • Baileigh RDB250 IMG DET1
  • Baileigh RDB250 IMG DET2
  • Baileigh RDB250 IMG DET3
  • Baileigh RDB250 IMG DET4
  • Baileigh RDB250 IMG DET5
  • Baileigh RDB250 IMG DET6
  • Baileigh RDB250 IMG DET7
  • Baileigh RDB250 IMG DET8
  • Baileigh RDB250 IMG DET9
  • Baileigh RDB250 IMG DET11
  • Baileigh RDB250 IMG DET12
  • Baileigh RDB250 IMG DET8
  • Baileigh RDB250 IMG DET10
1 14

Baileigh

BA9-RDB250220TS

Baileigh RDB-250 Hydraulic Rotary Draw Bender

Baileigh RDB-250 Hydraulic Rotary Draw Bender

Repeatable tube and pipe bending with programmed angle control.

The Baileigh RDB-250 uses 220V single-phase input for hydraulic rotary draw bending. Its material ratings include 2.5-inch OD mild-steel tube with a .125-inch wall and 2-inch Schedule 40 mild-steel pipe. A maximum 9-inch centerline radius and touchscreen with 170 bend programs support repeated fabrication work.

Power supply
220 V · Single phase
See all specifications
$13,099.00 USD
$13,099.00 USD
Sale Sold out
Shipping calculated at checkout.

Select if you need lift gate service. Preselected for products over 150 lb; you can uncheck it.
Plan your delivery

Machine net weight: 590.0 lb

Confirm freight access, unloading arrangements, and shop clearance before delivery.

View full details

Features

Practical details that help with setup, cutting, and everyday use.

  • Hydraulic drive

    220V single-phase input powers rotary draw bending.

  • Material capacity

    Bend up to 2.5-inch OD mild-steel tube with .125-inch wall or 2-inch Schedule 40 mild-steel pipe.

  • Centerline radius

    Maximum CLR is 9 inches, depending on material and tooling.

  • Controls

    Touchscreen with 170 bend programs supports repeated work.

  • Bend speed

    A 180-degree bend takes approximately 9 seconds.

  • Foot control

    A foot pedal controls operation.

  • Frame

    A welded steel frame supports production work.

Know the details

Specifications

Review the product’s dimensions, capacities and compatibility before ordering.

Baileigh RDB-250 Hydraulic Rotary Draw Bender — Specifications
Maximum centerline radius (in.)9
Model NumberRDB-250
Net weight590.0 lb
Shipping weight590.0 lb
Motor phaseSingle
Maximum bend angle (degrees)205
Input power220V Single Phase
Mild-steel pipe2 in. nominal Schedule 40
Aluminum pipe2 in. nominal Schedule 40
Stainless-steel pipe1.5 in. nominal Schedule 40
Mild-steel round tube2.5 in. OD x .125 in. wall
Aluminum round tube2.5 in. OD x .156 in. wall
Stainless-steel round tube2.375 in. OD x .125 in. wall
Chromoly round tube2 in. OD x .125 in. wall
Mild-steel solid rod1.25 in.
Mild-steel square tube2 in. x .125 in. wall
Centerline radius range.5–9 in.; material and tooling dependent
Minimum tube OD.25 in.
ControlTouchscreen with 170 bend programs
Frequency60 Hz
Capacity material basis60000 PSI tensile-strength mild steel
Time for 180-degree bendApproximately 9 seconds

Manufacturer warranty

1 Year Limited Warranty

Baileigh lists one-year limited coverage against manufacturer's defects for this product. Coverage is for the initial US end-user purchaser from delivery and is subject to the manufacturer's terms, exclusions and proof-of-purchase requirements.

Manuals & support

Use the manufacturer’s documentation for assembly, adjustments, maintenance, and safe operation.

Delivery planning

A little planning makes room for your machine and the work ahead.

Check the delivery route

Measure doors, turns, and the route to the machine’s final location. Confirm the packed dimensions and delivery access before ordering.

Plan unloading and positioning

Confirm the delivery service, unloading equipment, and any liftgate needs before ordering. Machine net weight is not the packed shipping weight.

Prepare power and working space

Follow the manufacturer’s manual for electrical requirements, dust collection, clearances, and setup. Allow space for the workpiece, infeed, and outfeed.